[Group-Buy] Jris65 PCB Gasket Mount Keyboard Kit - Ecoat Case (PVD Weight)

$205.00

Case Color
Description
Available Optional Extras
Please add to cart with your keyboard

Accessories

Solid Aluminum Wrist Rest

What are the differences between Jris65 R2 and R1?
  • The JST cable has been extended for a better build experience
  • Upgraded the material and finish of the screws
  • Added a 1.6mm Non-Flex Cut Black core Hotswap PCB.
  • Upgrade a piece of Poron Case Foam to Non-Flex Cut.
  • The plates has been upgraded to better support ISO compatibility.
  • Added the case colors options: Lilac, Orange, Silver, Maroon, Navy Blue, Dark Green, Titanium Grey, Orange&Black, Dark Green&Black.
  • Added the PVD Mirror Weight colors options: Blue, Purple, Gradient. New limited edition: Red and Black.
Specifications:
  • Typing angle: 6°
  • Front height: 21.29mm
  • PCB gaskets structure
  • PCB with USB-C daughterboard
  • Both PCB and plate adopt flex cut design
  • PCB gasket jackets or socks
  • Supports PCB stabilizers

What you can customize for JRIS65?

Case Colors Options:
  • 2 limited edition case: Red, Black
  • 7 E-coat case:E-white, Milky White, Pink, Lilac, Orange, E-White&Black, Orange&Black
  • 10 Anodized Case: Black, Silver, Maroon, Navy Blue, Dark Green, Titanium Grey, Maroon&Black, Dark Green&Black, Navy Blue&Black, Titanium Grey&Black
Weight Options:
  • Anodized Alu Weight: Black, Silver, Gold
  • PVD Mirror Stainless steel Weight: Gold, Silver, Black, Chroma, Blue, Purple, Gradient
PCB Options:
  • Wired Flex Cut Black core Hotswap PCB( 1.2mm, Multi Layout, support QMK and VIA )

  • Wired Non-Flex Cut Black core Hotswap PCB(1.6mm, Multi Layout, support QMK and VIA )

  • Wired Flex Cut Black core Solder PCB( 1.2mm, Multi Layout, support QMK and VIA )

  • 5.2 Bluetooth Hotswap PCB,battery included ( 1.2mm, ANSI Layout, support LDN Software)

BT PCB is cooperating with Li Dana. LDN’s PCB is famous in China because his PCBs are stable and qualified and user friendly. It has its drive and software, which can edit the key mapping. Please check the software driver interface here.

  • 8 devices can pair with it at the same time, and it is easy to switch the devices you want
  • The power switch is on the PCB, easy to turn BT function on/off
  • The fastest response time is only 1.25ms
  • The polling rate for the BT PCB is 1ms/1000hz

  • The battery is 1000mA. The working time is from around 15 to 30 days, determined by work intensity.

Note: We highly recommend using a PC/ POM/FR4 plate for BT PCB because the Brass and ALU plate will have a little affection for connectivity.

Plate Options: 
  • PC/POM/FR4/ALU
  • Brass (Add-on only)/Black core FR4 (Add-on only)
Plateless Build Option:

We highly suggest building plateless with 5mm extra plate foam and solder PCB. The 5mm extra plate foam will bring a softer typing feel, and the typing sound will be cleaner. Without the 5mm plate foam it will also work fine, the typing feel and sound are very different.

 

What's Included?

  • 1x Full CNC Aluminum Case
  • 1x Weight( Anodized Alu/ PVD Mirror)
  • 1x PCB (Hotswap/ Soldered/ Bluetooth)
  • 1x Plate (PC/ FR4/ Alu/POM)
  • 1x Type-C Daughterboard
  • 1x IXPE Foam
  • 1x Poron Plate Foam
  • 1x Flex Cut Poron Case Foam
  • 1x Non-Flex Cut Poron Case Foam
  • 1x Masking paper for PCB
  • 1x JST Cable
  • 10x gasket jackets
  • 20x gasket socks
  • 1 Set of PCB stabilizers O-ring
  • 1 Set of Footpad
  • 1x Silicone pad of battery compartment (We include this as default, so you don't need to consider choosing which PCB to be the default.)
  • 1x Battery(Only for the Bluetooth version)
Gift(will not send make-up or replacements)
  • 1x USB-Type C keyboard cable
  • 1x Carrying Case
Group Buy or Pre-order Disclaimer

1. The renders only provide an idea of what the final product will look like. The physical product may have some differences. Please also refer to the prototype's photos as a reference before purchasing.

2. Estimates of time are our best guesses, they're not 100% guaranteed. Delays and setbacks may occur.

3. DO NOT PURCHASE if you disagree with the terms and conditions.

4. GB or Pre-order items will not have order combinations. Please place only one order.

5. There will be a 4.4% fee on order cancellations and refunds after placing an order.

6. Your payment method will be charged once you place the order. There are no change orders, refunds, or cancellations after the group buy or pre-order ends.

7. Please complete the inspection below within three days after receiving the package. If you find any issues, kindly take some photos to show and contact our customer service team for further assistance.
- Exterior Packaging Inspection: Please carefully examine the external packaging of the parcel for any signs of damage, such as noticeable tears or rips.
- Item Quantity Verification: Kindly verify that the quantity of items within the package matches the details on the order.
- Product Exterior Check: Please thoroughly inspect the products for defects and damages.

In Stock Disclaimer

Cancellation

Order cancellation before the product is shipped or produced is acceptable. We cannot cancel the order if the product is already shipped out.

Noted: Group Buy item, please refer to the relevant policies of the Group Buy policy.

Processing Fees

Any refund is subject to a 4.4% processing fee to cover various merchant fees that we do not get back.

Returns (if applicable)

We accept the return of products. Customers have the right to apply for a return within 14 days after product delivery. And the return shipping fee should be borne by customers.

The order must be unused, and in the same condition, you received. It must also be in the original packaging.

To complete your return, we require a receipt or proof of purchase. Please ask our customer service to ensure you send the package to the correct address.

Important Notice

1. The renders only provide an idea of what the final product will look like. The physical product may have some differences. Please also refer to the prototype's photos as a reference before purchasing.

2. Please complete the inspection below within three days after receiving the package. If you find any issues, kindly take some photos to show and contact our customer service team for further assistance.
- Exterior Packaging Inspection: Please carefully examine the external packaging of the parcel for any signs of damage, such as noticeable tears or rips.
- Item Quantity Verification: Kindly verify that the quantity of items within the package matches the details on the order.
- Product Exterior Check: Please thoroughly inspect the products for defects and damages.

Quality Disclaimer

1. Each kit comes with fragile labels. Please check the appearance thoroughly before building. If you see any noticeable flaws/scratches on the external surfaces, please take a photo and contact us immediately. We’ll not be responsible for any flaws/scratches found after building.

2. Due to the nature of the PVD coat, there may be minor, unavoidable dust points/micro scratches on the mirror finish of the PVD weight. The small dust points/micro scratches are only visible at just the right angle of the lighting.

3. Chroma andGradient PVD Mirror Stainless steel weight has random nature. Each weight may have some slight differences.

4. CNC marks and imperfections inside the keyboard case or dents on the subject are not visible when the keyboard is fully built. These are normal and within our quality acceptance.

5. On all other surfaces and edges, blemishes under 2mm are approved.

6. The bottom of the Solid Aluminum Wrist Rest is defined as a B-level surface because the bottom side is the hanger side during the anodized process. The QC standard for B-level cover: blemishes under 1cm are approved on the surfaces and edges. Three or fewer fine trachoma, dust spots, etc., are within our quality acceptance (The diameter is under0.5mm). Color uniformity is a normal phenomenon around the process hole, but it is guaranteed that it will not be visible after installation.

7. Other than the case itself, all parts with cosmetic imperfections will not be replaced unless the function is damaged for usage.

8. Warranty only applicable for the first owner who purchased on our website or at our collaborative shops, with proof of purchase such as order number and confirmation.

9. Our warranty covers the PCB for one year of use or if dead on arrival without any modification.

10. Broken parts due to any human error will void your warranty. Including below list but not only

  • - Mill-maxing PCB
  • - Tape modding PCB
  • - Hotswap Sockets that are pushed out of the PCB solder pads
  • - Did not follow the steps to flash PCB and caused no function

 11. Gifts will not ship out replacements or issue a partial refund.

Shipping

We aim to offer you the best shipping options, no matter where you live. We deliver to hundreds of customers worldwide every day and strive to provide you with services of the highest level.

For the Group Buy product: Please pay attention to the project update.

For the in-stock item: The estimated order delivery time is be divided into two parts:
Processing time: 2-5 Days
Shipping time: 7~30 Days

The shipping estimate is only the time of travel, which is subject to delay due to covid.

Shipping methods: Epacket/DHL/UPS/FedEx/USPS/Other economic shipping Shipping fee: Depends on weight and shipping method specified and selected by customers.

Duties and import taxes:All costs associated with international shipping such as customs duties and import taxes are the responsibility of the customer.

Shipping address: we do not accept any third-party logistics warehouse, otherwise the resulting return of goods, detention of goods, destruction and other related costs will be paid by the customer.

Once departed, couriers will be liable for the delivery. In case of a package is lost after delivery, Mykeyclub is not responsible. However, we will assist during the claiming process in case of failed delivery.

If you have any questions about your order delivery, please email service@mykeyclub.com

What are the differences between Jris65 R2 and R1?

○ The JST cable has been extended for a better build experience.

○ Upgraded the material and finish of the screws.

○ Added a 1.6mm Non-Flex Cut Black core Hotswap PCB.

○ Upgrade a piece of Poron Case Foam to Non-Flex Cut.

○ The plates has been upgraded to better support ISO compatibility.

○ Added the case colors options: Lilac, Orange, Silver, Maroon, Navy Blue, Dark Green, Titanium Grey, Orange&Black, Dark Green&Black.

○ Added the PVD Mirror Weight colors options: Blue, Purple, Gradient.

○ New limited edition: Red and Black.

---JRIS65---

What can you customize for JRIS65 R2?

CASE COLORS OPTIONS

5 E-coat case:E-white/ Milky White/ Pink/ Lilac/ Orange
6 Anodized Case: Black/ Silver/ Maroon/ Navy Blue/ Dark Green/ Titanium Grey
6 color combos case: Orange&Black/ E-White&Black/ Maroon&Black/ Dark Green&Black/ Navy Blue&Black/ Titanium Grey&Black

WEIGHT OPTIONS

7 Anodized Alu Weight:  Gold / Silver / Black / Chroma / Blue / Purple / Gradient

3 PVD Mirror Stainless steel Weight: Gold/ Silver/ Black

PCB OPTIONS

Wired Flex Cut Black core Hotswap PCB( 1.2mm, Multi Layout, support QMK and VIA )

Wired Non-Flex Cut Black core Hotswap PCB(1.6mm, Multi Layout, support QMK and VIA )

Wired Flex Cut Black core Solder PCB( 1.2mm, Multi Layout, support QMK and VIA )

5.2 Bluetooth Hotswap PCB, battery included ( 1.2mm, ANSI Layout, support LDN Software)

PLATE OPTIONS

PC/POM/FR4/ALU

Brass (Add-on only)/Black core FR4 (Add-on only)

PLATELESS OPTIONS

We highly suggest building plateless with 5mm extra plate foam and solder PCB. The 5mm extra plate foam will bring a more soft typing feel, and the typing sound will be cleaner. But without the 5mm plate foam, it will also work fine, and the typing feel and sound are very different.

---JRIS65---

Specifications

Typing angle: 6°
Front height: 21.3mm
PCB GASKETS structure
PCB with USB-C daughterboard
Both PCB and plate adopt flex cut design
PCB gasket jackets or socks (included as default)
QMK/VIA Supported (Note: The BT PCB has its drive, so it doesn't support VIA/QMK)
Support PCB stabilizers

---JRIS65---

What's in package?

Standard
  • 1x Full CNC Aluminum Case
  • 1x Weight( Anodized Alu/ PVD Mirror)
  • 1x PCB (Hotswap/ Soldered/ Bluetooth)
  • 1x Plate (PC/ FR4/ Alu/POM)
  • 1x Type-C Daughterboard
  • 1x IXPE Foam
  • 1x Poron Plate Foam
  • 1x Flex Cut Poron Case Foam
  • 1x Non-Flex Cut Poron Case Foam
  • 1x Masking paper for PCB
  • 1x JST Cable
  • 10x gasket jackets
  • 20x gasket socks
  • 1 Set of PCB stabilizers O-ring
  • 1 Set of Footpad
  • 1x Silicone pad of battery compartment (We include this as default, so you don't need to consider choosing which PCB to be the default.)
  • 1x Battery(Only for the Bluetooth version)
GIFT(will not send make-up or replacements) 
  • 1x USB-Type C keyboard cable
  • 1x Carrying Case
---JRIS65---

Review Videos

Play

More review videos

Yo_keebs - Orange Case+Black PVD Weight

Rx003 - Silver Case+Silver PVD Weight

hi_keebs - Black Case+Chroma PVD Weight

YBBK - Limited Edition Black Case + Black PVD Weight

SeungupKBD - DarkGreen Case with Gold PVD Weight

Preston's Thoughts - Milky-White Case+Silver PVD Weight

bored bear - Limited Edition Red Case+ Silver PVD Weight

---JRIS65---

Vendor List

US: KeebsForAll 

Canada: Ashkeebs 

EU: Candykeys 

UK: Prototypist 

Oceania: SwitchKeys

South Korea: Geonworks 

Japan: Basekeys 

Singapore: Mecha.Store 

Indonesia: KeebsMark 

Philippines: Zion Studios 

Thailand: NTCH Keys 

Malaysia: Rebult Keyboards

Vietnam: MOKB STORE 

Taiwan: 鍵盤好貴 

Rest of the world: Mykeyclub